User`s guide

Profoto D1
23
www.profoto.com
Remote mode
The remote control Head On / Head Off command is a group command used for turning
off / on lamp heads on Profoto Generators. However useful for larger studio setups, this
command may be changed to work as Power On / Power Off instead.
Operating instructions
To make the generator read a Head On / Head Off command as Power On / Power Off, go to
standby and press the “Ready” button for 10s. The display will toggle between “A0” (Head
On / Head Off) or “A1” (Power On / Power Off).
Remote control
When the Head Off command has been used with the remote control or Profoto Studio, the
user also has the option to turn on the head via the generator interface by pressing either
the knob or entering/leaving standby.
The user has the option to turn off radio communication completely by turning off radio
sync on the generator panel interface. By doing this he turns off all possibility to control the
generator via remote control or Profoto Studio. A user also has the option to turn off radio
sync from Profoto Studio but this will not turn off the radio communication.