Integration Manual

RMI3
4
www.profoto.com
NOTE ABOUT RF!
This equipment makes use of the radio spectrum and emits radio frequency energy. Proper care
should be taken when the device is integrated in systems. Make sure that all specifications within
this document are followed, especially those concerning operating temperature and supply voltage
range. Make sure the device is operated according to local regulations. The frequency spectrum
this device is using is shared with other users. Interference can not be ruled out.
SAFETY PRECAUTIONS!
Do not attempt to operate the equipment before studying the instruction manual and the accompanying
safety instructions. Failure to do so may result in serious injuries.
Make sure that Profoto Safety Instructions is always accompanied the equipment!
Profoto products are intended for professional use!
Do not place or use the equipment where it can be exposed to moisture, extreme electro-
magnetic fields, or in areas with flammable gases or dust!
Do not expose the equipment to rapid temperature changes in humidity conditions as this could lead to
water condensation in the unit.
Equipment must only be serviced by authorized and competent service personnel!
Any modifications will break the modular certification and require the module to be re-certified.
FINAL DISPOSAL
This equipment contains electrical and electronic components that could be harmful to the
environment.
Equipment may be returned to Profoto distributors free of charge for recycling according to WEEE.
Follow local legal requirements for separate disposal of waste, for instance WEEE directive for electrical
and electronic equipment on the European market, when the product ‘s life has ended!
Safety instructions