Instructions / Assembly

FUNCTIONS OF TRANSMITTER
:
OFF : Turn off
the ceiling fan.
HI : Turn on the fan at high speed.
MED : Turn on the fan at medium speed.
LOW : Turn on the fan at low speed.
LIGHT : ON/OFF
- Press and release
immediately to turn on or
off the light.
DIMMER
(If any)- Press and hold on to dimmer
or brighten
the light.
The Reverse switch is located on the motor
housing. Slide the switch to the Left for warm
weather operation. Slide the switch to the Right
for cool weather operation. (Fig. 13)
NOTE: Wait for fan to stop before changing the setting
of the slide switch.
Speed settings for warm or cool weather depend on
factors such as the room size, ceiling height, number of
fans, etc.
Warm weather - (Forward) A downward air flow
creates a cooling effect as shown in Figure 14. This
allows you to set your air conditioner on a higher
setting without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves
warm air off the ceiling area as shown in Figure 15.
This allows you to set your heating unit on a lower
setting without affecting your comfort.
7.
Operating Your Transmitter
Installation of Transmitter
Wall Mount Holder with two
screws.
REVERSE ON-OFF
Figure 13