Installation Guide

5.
An additional safety support is provided to
prevent the fan from falling. Secure the safety
cable to the ceiling joist with screw and washer.
(Fig. 10)
Step 4. Once the connection has been made,
the receiver inserts into the drop rod hanging
bracket. The canopy comes up to cover the
receiver and bracket. (Fig. 11)
Installing the canopy:
Step 1. Align the locking slots of the canopy
(C) with the two screws (FF) in the mounting
bracket (A). Push up to engage the slots and to
lock in place. (Fig. 12)
Step 2. Rotate the metal cover (D) clockwise
to lock in the bottom of the canopy. (Fig. 12)
Installing metal mesh and bulbs:
Step 1. Insert the fan blades (M) onto the shaft
(U), install lock nut (Q) onto the fan shaft after
the blade assembly (M) is installed. (Fig. 13)
Step 2. Screw light bulbs (F) into the fixture
sockets. (Fig. 13)
Step 3. Align the locking slots of the metal
grill (G) with three Knurled screw (H) in the
fixture (E). Push up to engage the slots and to
lock in place. (Fig. 13)
#8 X 1-1/2 Screw
Figure 10
Spring washer
Flat washer
Safety cable
ON DIP
1 2 3 4
HANGER
BRACKET
RECEIVER
Figure 11
CANOPY
A
C
FF
D
Figure 12
E
F
G
H
M
Q
U
Figure 13