Installation Sheet
Table Of Contents
- PLO188-P250022-E
- PLO188-P250022-E-Cover
- PLO188-P250022-Warranty
- PLO188-P250022-E-P0
- PLO188-P250022-E-P1a
- PLO188-P250022-E-P2
- PLO188-P250022-E-P3
- PLO188-P250022-E-P4
- PLO188-P250022-E-P5
- PLO188-P250022-E-P6a
- PLO188-P250022-E-P6b
- PLO188-P250022-E-P7
- PLO188-P250022-E-P8
- PLO188-P250022-E-P9
- PLO188-P250022-E-P10
- PLO188-P250022-E-P11
- PLO188-P250022-E-P12
- PLO188-P250022-S
- PLO188-P250022-S-Cover
- PLO188-P250022-S-Warranty
- PLO188-P250022-S-P0
- PLO188-P250022-S-P1a
- PLO188-P250022-S-P2
- PLO188-P250022-S-P3
- PLO188-P250022-S-P4
- PLO188-P250022-S-P5
- PLO188-P250022-S-P6a
- PLO188-P250022-S-P6b
- PLO188-P250022-S-P7
- PLO188-P250022-S-P8
- PLO188-P250022-S-P9
- PLO188-P250022-S-P10
- PLO188-P250022-S-P11
- PLO188-P250022-S-P12
1. Safety Rules
To reduce the risk of electric shock, ensure electricity has been turned off
at the circuit breaker or fuse box before beginning.
All wiring must be in accordance with the National Electrical Code
“ANSI/NFPA 70-1999” and local electrical codes. Electrical installation
should be performed by a qualified licensed electrician.
The outlet box and support structure must be securely mounted and
capable of reliably supporting a minimum of 35 lbs (15.9 kg) or less. Use
only UL-listed outlet boxes marked “FOR FAN SUPPORT.”
The fan must be mounted with a minimum of 7 ft. (2.1m) clearance from
the trailing edge of the blades to the floor.
Avoid placing objects in the path of the blades.
To avoid personal injury or damage to the fan and other items, be
cautious when working around or cleaning the fan.
Do not use water or detergents when cleaning the fan or fan blades. A dry
dust cloth or lightly dampened cloth will be suitable for most cleaning.
After making electrical connections, spliced conductors should be turned
upward and pushed carefully up into the outlet box. The wires should be
spread apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and ungrounded conductor on the
other side of the outlet box.
All set screws must be checked and retightened where necessary before
installation.
Suitable for use with solid-state speed control.1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
WARNING
TO REDUCE THE RISK OF PERSONALL INJURY, DO NOT BEND THE
BLADE ARMS (ALSO REFERRED TO AS FLANGES), WHEN
INSTALLING THE BRACKETS, BALANCING THE BLADES OR
CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS IN –
BETWEEN ROTATING FAN BLADES.
NOTE
READ AND SAVE THESE INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR OTHER PERSONAL
INJURY, MOUNT FAN ONLY ON AN OUTLET BOX OR SUPPORTING
SYSTEM MARKED ACCEPTABLE FOR FAN SUPPORT OF 35 LBS (15.9 KG)
OR LESS AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET
BOX. MOST OUTLET BOXES COMMONLY USED FOR THE SUPPORT OF
LIGHTING FIXTURES ARE NOT ACCEPTABLE FOR FAN SUPPORT AND
MAY NEED TO BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN
DOUBT.