Installation Guide
Table Of Contents
- PLO188-P250022-E-Cover
- PLO188-P250022-Warranty
- PLO188-P250022-E-P0
- PLO188-P250022-E-P1a
- PLO188-P250022-E-P2
- PLO188-P250022-E-P3
- PLO188-P250022-E-P4
- PLO188-P250022-E-P5
- PLO188-P250022-E-P6a
- PLO188-P250022-E-P6b
- PLO188-P250022-E-P7
- PLO188-P250022-E-P8
- PLO188-P250022-E-P9
- PLO188-P250022-E-P10
- PLO188-P250022-E-P11
- PLO188-P250022-E-P12
- PLO188-P250022-S-Cover
- PLO188-P250022-S-Warranty
- PLO188-P250022-S-P0
- PLO188-P250022-S-P1a
- PLO188-P250022-S-P2
- PLO188-P250022-S-P3
- PLO188-P250022-S-P4
- PLO188-P250022-S-P5
- PLO188-P250022-S-P6a
- PLO188-P250022-S-P6b
- PLO188-P250022-S-P7
- PLO188-P250022-S-P8
- PLO188-P250022-S-P9
- PLO188-P250022-S-P10
- PLO188-P250022-S-P11
- PLO188-P250022-S-P12
11. Care of Your Fan
Here are some suggestions to help you maintain
your fan
1. Because of the fan's natural movement, some
connections may become loose.
Check the
support connections, brackets, and blade
attachments twice a year.
Make sure they are
secure.
(It is not necessary to remove fan from
ceiling.)
2. Clean your fan periodically to help maintain its
new appearance over the years. Use only a soft
brush or lint-free cloth to avoid scratching the
finish. The plating is sealed with a lacquer to
minimize discoloration or tarnishing. Do not use
water when cleaning. This could damage the
motor, or the wood, or possibly cause an electrical
shock.
3. You can apply a light coat of furniture polish
to the wood blades for additional protection and
enhanced beauty. Cover small scratches with a
light application of shoe polish.
4.
There is no need to oil your fan.
The motor
has permanently lubricated bearings.
IMPORTANT
MAKE SURE THE POWER IS OFF AT
THE ELECTRICAL PANEL BOX BEFORE
YOU ATTEMPT ANY REPAIRS. REFER
TO THE SECTION "MAKING
ELECTRICAL CONNECTIONS".
Attach the remote control holder with the remote
control holder mounting screw. (Figure 21)
Remote
Control
Holder
Screw
Installing the Remote Control
Holder
Figure 21