® 93089919_A P2572
Limited Lifetime Warranty Progress Lighting fan motors are warranted to the original purchaser to be free of electrical and/or mechanical defects for so long as the original purchaser owns the fan. Pull chain switches, reverse switches, capacitors and metal finishes are warranted to be free from defects in materials or workmanship for a period of 1 year from the date of purchase.
Safety Rules 1 Unpacking Your Fan 2 Installing Your Fan 3 Setting the Codes on Remote Control and Receiver 5 Making the Electrical Connections 6 Finishing the Fan Installation 7 Operating Your Fan 9 Care of Your Fan 10 Troubleshooting 10 Specifications 11 Table of Contents
READ AND SAVE THESE INSTRUCTIONS 1. To reduce the risk of electric shock, insure electricity 2. 3. 4. 5. 6. has been turned off at the circuit breaker or fuse box before beginning. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. CAUTION: To reduce the risk of personal injury, use only the screws provided with the electrical box.
4 1 5 a b 2 6 7 3 Unpack your fan and check the contents. You should have the following items: 1. 2. 3. 4. Mounting Plate (inside canopy) Fan Motor Assembly Light Kit Pan Glass Shade 5. Light Kit Fitter Assembly 6. Transmitter 7. Blade (5) a. Blade attachment hardware (16 Screws) b. Electrical hardware and Balancing kit (3 plastic wire connectors, blade balancing kit) 2.
Tools Required Figures 1 and 2 are examples of different ways to mount the electrical box. Phillips screw driver or straight slotted screw driver, adjustable wrench, step ladder, and wire cutters. Mounting Options If there isn’t an existing electrical box, then read the following instructions. Disconnect the power by removing fuses or turning off circuit breakers. Figure 1 Secure the electrical box directly to the building structure. Use appropriate fasteners and building materials.
Hanging the Fan REMEMBER to turn off the power. Follow the steps below to hang your fan properly. NOTE: For better fan performance, make sure the mounting plate is level. Additional washers (not included) may be needed to insert between the outlet box and the mounting plate. 6. Align the two key slots in the top of the motor housing with the two loosened screws on the mounting plate. Push the motor housing up and turn it clockwise to lock in the mounting plate. Tighten the two screws. 7.
Setting the Codes This unit has 16 different code combinations to prevent possible interference from other remote units such as garage door openers, car alarms or security systems. Transmitter Airpro To set the codes, perform the following steps: The reverse button R Model:UC7085T FCC ID:CHQ7085T IC:2968A-7085T Complies with Canada RSS-210 MADE IN CHINA A. Remove the battery cover from the battery compartment in the back side of the transmitter.
Remote control model: UC7067RYE Follow the steps below to connect the fan to your household wiring. (Figure 8) Connect the GROUND conductor of the 120-volt supply to the GREEN wire from the mounting plate using a wire nut (Figure 8). Connect the receiver BLACK wire to the BLACK household supply wire using a wire nut (Figure 8). Outlet Box BLACK WHITE GREEN REMEMBER to disconnect the power.
Attaching the Fan Blades 1. Insert the blade through the slot cut-off in the center flywheel, align the three screw holes in the blade with the screw holes in the flywheel and secure with the screws provided. (Figure 9) 2. Repeat for the remaining blades. Blade Balancing 3. Make sure that motor bracket is tightened securely to ceiling mounting plate and that the ceiling mounting plate is tightened securely to the electrical box. 4.
Installing the Light Kit Pan/Light Kit Assembly/Glass Shade CAUTION - To reduce the risk of electrical shock, disconnect the electrical supply circuit to the fan before installing the light kit. 1. Loosen but do not remove two of three mounting screws from the fan motor assembly; Remove one mounting screw. (Figure 11) 2. Push the light kit pan up to the fan motor assembly so that the two loosened screw heads fit into the keyhole slots. Turn the light kit pan clockwise, tightened the screws.
Speed settings for warm or cool weather depend on factors such as room size, ceiling height, number of fans, and so on. Remote control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan.
Care of Your Fan Here are some suggestions to help you maintain your fan. 1. Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. (It is not necessary to remove fan from ceiling.) 2. Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, this could damage the motor, or the wood or possibly cause an electrical shock.
FAN SIZE 52” SPEED Low Med High FAN POWER CONSUMPTION AIRFLOW VOLTS (WITHOUT LIGHTS) CFM WATTS 120 13 28 62 1640 2872 4276 AIRFLOW EFFICIENCY (HIGHER IS BETTER) CFM/WATT 126 103 69 NET WEIGHT 19.84 Lbs GROSS CUBE WEIGHT FEET 22.93 Lbs 2.4 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
® Manual de instalación del ventilador de techo 93089919_A P2572
Garantía limitada de por vida Los motores de ventilador Progress Lighting se garantizan al comprador original como libres de defectos eléctricos y/o mecánicos por el tiempo en que estén en posesión de dicho comprador. Los interruptores activados por cadena, los interruptores de reversa, los capacitores y los acabados de metal se garantizan como libres de defectos materiales o de fabricación por un periodo de 1 año desde la fecha de compra.
Normas de seguridad 1 Cómo desempacar el ventilador 2 Cómo instalar el ventilador 3 Cómo configurar los códigos del control remoto y el receptor 5 Cómo hacer las conexiones eléctricas 6 Cómo finalizar la instalación del ventilador 7 Cómo usar el ventilador 9 Cuidado del ventilador 10 Solución de problemas 10 Especificaciones 11 Tabla de contenido
LEE Y GUARDA ESTAS INSTRUCCIONES 1. Para disminuir el riesgo de descarga eléctrica, antes de comenzar la instalación asegúrate de que la electricidad ha sido cortada en el cortacircuitos o en la caja de fusibles. 2. Todo el cableado tiene que cumplir con el Código Nacional de Electricidad ANSI/NFPA 70-1999 y con los códigos locales de electricidad. La instalación eléctrica debe hacerse por un electricista calificado y con licencia. 3.
4 1 5 a b 2 6 7 3 Desempaca tu ventilador y revisa el contenido. Debes tener los siguientes artículos: 1. 2. 3. 4. Placa de montaje (dentro de la cubierta) Conjunto motor-ventilador Carcasa del kit de luces Pantalla de vidrio 5. Conjunto del soporte del kit de luces 6. Transmisor 7. Aspas (5) a. Herrajes de montaje de aspas (16 tornillos) b. Kit de compensación y componentes eléctricos (3 conectores plásticos de cable, kit de compensación de aspas) 2.
Herramientas necesarias Las figuras 1 y 2 ejemplifican diferentes maneras de montar la caja eléctrica. Destornillador Phillips o de punta plana, llave ajustable, escalera de tijera y cortacables. Opciones de montaje Caja eléctrica Si no hay una caja eléctrica presente, lee las siguientes instrucciones. Desconecta la energía retirando los fusibles o apagando los cortacircuitos. Figura 1 Asegura la caja eléctrica directamente a la estructura de la edificación.
Cómo colgar el ventilador RECUERDA cortar el suministro de electricidad. Sigue estos pasos para colgar correctamente tu ventilador. NOTA: Asegura que la placa de montaje esté nivelada para garantizar mejor rendimiento del ventilador. Pueden necesitarse arandelas adicionales (no incluidas) para insertar entre la caja eléctrica y la placa de montaje. 1. Fija la placa de montaje firmemente en la caja eléctrica usando los dos tornillos de la misma.
Airpro Botón de reversa The reverse button R Model:UC7085T FCC ID:CHQ7085T IC:2968A-7085T Complies with Canada RSS-210 MADE IN CHINA N 4 4 DIP 4 1 ON 2 ON 3 4 DIP Receiver Receptor 3 Interruptores Dip SwitchesDIP 3 3 12V 1. Cómo configurar el código del transmisor: A. Quita la cubierta del compartimento de las baterías en la parte posterior del transmisor.
Modelo del control remoto: UC7067RYE NOTA Sigue estos pasos para conectar tu ventilador al circuito de tu hogar. (Figura 8) Conecta el conductor A TIERRA del cable de suministro de 120 V al cable VERDE de la placa de montaje usando una tuerca para cables (Figura 8). Conecta el cable NEGRO del receptor al cable de suministro NEGRO usando una tuerca para cable (Figura 8). Caja eléctrica Outlet Box NEGRO BLACK WHITE BLANCO VERDE GREEN RECUERDA cortar el suministro de electricidad.
Cómo fijar las aspas del ventilador 1. Inserta el aspa en la abertura del centro del volante, alinea los tres orificios para tornillo en el aspa con sus correspondientes en el volante, y asegura con los tornillos incluidos. (Figura 9) 2. Repite el procedimiento para las aspas restantes. Cómo equilibrar las aspas Todas las aspas se agrupan por peso. Puesto que las maderas naturales varían en densidad, el ventilador puede oscilar aunque las aspas tengan el mismo peso.
Cómo instalar la carcasa del kit de luces/conjunto del soporte del kit de luces/pantalla de vidrio PRECAUCIÓN - Para reducir el riesgo de descarga eléctrica, desconecta el circuito eléctrico de alimentación al ventilador antes de instalar el kit de luces. 1. Afloja, pero no quites, dos de los tres tornillos de montaje del conjunto motor-ventilador; retira un tornillo de montaje. (Figura 11) 2.
Las configuraciones de velocidad para clima cálido o frío dependen de factores como el tamaño de la habitación, la altura del techo, la cantidad de ventiladores y otras. Control remoto - Tu ventilador está equipado con un control remoto que controla la velocidad y las luces.
Cuidado del ventilador Aquí tienes algunas sugerencias para dar mantenimiento a tu ventilador. 1. Por causa del movimiento natural del ventilador, algunas conexiones pueden aflojarse. Revisa las conexiones de soporte, los soportes y los accesorios de aspas dos veces al año. Comprueba que estén seguros. (No es necesario desmontar el ventilador del techo). 2. Limpia el ventilador con frecuencia para que luzca como nuevo al paso de los años.
TAMAÑO DEL VENTILADOR 52" (1.32 m) VELOCIDAD Baja Media Alta VOLTIOS POTENCIA DEL VENTILADOR CONSUMO (SIN LUCES) VATIOS FLUJO DE AIRE CFM 28 62 2872 4276 120 13 1640 EFICIENCIA DE FLUJO DE AIRE (MÁS ALTO ES MEJOR) CFM/W 126 103 69 PESO NETO PESO BRUTO PIES CÚBICOS 19.84 Lbs 22.93 Lbs 2.4 Este equipo fue sometido a prueba y se determinó que cumple con los límites establecidos para un dispositivo digital Clase B según la Parte 15 de las Normas FCC.