Installation Guide

Attaching the Fan Blades

NOTE: Your fan blades are reversible. Select

the blade side finish which best accentuates

your decor.

Step 1 Attach blades to blade arms using three

screws and fiber washers as shown in Fig. 5.

Start a screw into the arm, do not tighten.

Repeat for the 2 remaining screws and

washers.

Step 2 Tighten each screw securely starting

with the center screw. Make sure the blade is

straight.

Step 3 Fasten the blade assembly to the motor

using the motor screws provided. (Fig. 5)

Attaching the Motor Cover

Step 1 Remove the six screws and lock washers

from the motor collar. (Fig. 6)

Step 2 Place the motor cover over the motor. Align

the mounting holes with the holes in the motor and

fasten using the six screws and lock washers

previously removed. (Fig. 6)

Figure 5

Figure 6

Screws

Motor

Blade

Blade arm

Fiber

washers

Screws

Motor

cover

Motor

collar