*“E P300045-009 P300046-009 P300045-020 P300046-020 PACKAGE CONTENTS 1-LT BATH VANITY 2-LT BATH VANITY QUANTITY PART| DESCRIPTION P300045 | P300046 A | Fixture Glass Shade Spring Latch 1 2 P300045 <: ) ©— _ORP300046 1 (] Eek o HARDWARE CONTENTS (not actual size) Screw Wire nut Round Mounting Plate Hex nut Cylinder nut Qty:2 Qty:3 Qty:1 Qty:2 Qty:2 Missing parts? Please contact Customer Service at 1-800-447-0573, @ am-8pm (Eastern}), Monday Friday, or at 93077827 Page:1
A Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3. Strip 3/8” of insulation from the electrical wire ends. Using 5. Attach spring latch (C) around glass shade (B) in wire nuts (BB), connect white fixture wire fo the white supply order to secure tight to fixture (A) as shown below. wire from the junction box; connect the black fixture wire to the black supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the round mounting plate.
