Warranty Sheet

ManualsBrandsProgress Lighting ManualsHanging LightsTrinity Collection 3-Light Antique Bronze Foyer Pendant

PROGRESS LIGHTING LIMITED WARRANTY

Limited Warranty (“Warranty”): Subject to the exclusions set forth below, Progress Lighting, Inc. (“Progress”) warrants that (i) all

Progress manufactured products (“Products”) will be free from defects in material and workmanship which cause the Products

to fail to operate in accordance with the speciﬁcations set forth in the documentation published or provided with the Products

(the “Speciﬁcations”) for a period of one (1) year from the date of shipment (“Non-LED Warranty Period”) and (ii) all Progress

light emitting diode (“LED”) Products, will be free from defects in material and workmanship which cause the Products to fail to

operate in accordance with the Speciﬁcations for a period of ﬁve (5) years from the date of shipment (“LED Warranty Period”).

For purposes of this Warranty, references to “Warranty Period” shall refer to either the Non-LED Warranty Period or the LED

Warranty Period, depending on the type of Product purchased by the End User. Progress warrants that any standard ﬁnish on

a Product (other than Homestyle branded Products) will be free from cracking, peeling, excessive fading, and corrosion defects

during the applicable Warranty Period. Extended warranties for Progress fan motors and Energy Star® Products may apply; please

refer to Progress Product manuals for more information. For LED Products, the LED arrays in the Products will be considered

defective in material or workmanship only if a total of 15% or more of the individual LEDs in the Products fail to illuminate.

Exclusions: This Warranty applies only when the Products have been properly handled, stored, wired, transported, installed,

operated and maintained in accordance with the applicable Speciﬁcations, including, without limitation, installation in applications

in which ambient temperatures are within the range of speciﬁed operating temperatures and operation within the electrical values

shown on the Speciﬁcations. Progress shall have no responsibility under this Warranty for any failure of the Products that results

from external causes including without limitation: acts of nature; physical damage; exposure to adverse or hazardous chemicals

or other substances; use of reactive cleaning agents and/or harsh chemicals to clean the Products; environmental conditions;

vandalism; ﬁre; power failure, improper power supply, power surges or dips, and/or excessive switching; fatigue failure or similar

phenomena resulting from induced vibrations, harmonic oscillation or resonance associated with movement of air currents around

the Product; animal or insect activity; fault or negligence of the purchaser of the Products, any end user of the Products and/or

any third parties not engaged by Progress, improper or unauthorized use, installation, handling, storage, alteration, maintenance

or service, including failure to abide by any product classiﬁcations or certiﬁcations, or failure to comply with any applicable

standards, codes, recommendations, product speciﬁcation sheets, use of Products with products, processes or materials supplied

by the purchaser of the Products, any end user or third parties, or any other occurrences beyond Progress’s reasonable control.

In addition, Progress shall have no responsibility under this Warranty for any substantial deterioration in the Product ﬁnish that is

caused by failure to clean, inspect or maintain the ﬁnish of the Products. During the Warranty Period some staining, chalking or

fading may occur. This is normal aging of the ﬁnish and is not a manufacturing defect; therefore it is not covered by this Warranty.

Neither polycarbonate nor acrylic material used in the Products is warranted against yellowing, as yellowing may naturally occur

over time due to normal aging. If the Products are used on existing foundations, anchorages or structures, the purchaser of

the Products and/or any end user is solely responsible for the structural integrity of such existing foundations, anchorages or

structures and all consequences arising from their use.

Adequate records (as determined by Progress in its sole discretion) of operating history, maintenance, and/or testing must be kept

by the end user and provided to Progress upon request to substantiate that the Products have failed to comply with the terms of

this Warranty. The Products are not warranted against costs that may be incurred in connection with changes or modiﬁcations to

the Products required to accommodate site conditions and/or faulty building construction or design. In addition, the Products

are not warranted against cost resulting from installation of third party components, failures of third party supplied components,

or failures of Progress supplied Products caused by third party supplied components. This Warranty is not applicable to any

product(s) which are not installed and operated in accordance with the current edition of The National Electric Code (NEC), the

Standards for Safety of Underwriters’ Laboratory, Inc. (UL), or the standards for the American National Standards Institute (ANSI),

and with Progress instructions and guidelines for the Product. THIS WARRANTY IS VOID WITH RESPECT TO ANY PRODUCT IF

THE PRODUCT IS NOT USED FOR THE PURPOSE FOR WHICH IT WAS DESIGNED OR IF ANY REPAIRS OR ALTERATIONS ARE

MADE BY ANY PERSON NOT AUTHORIZED BY PROGRESS IN WRITING.

Except as otherwise set forth herein, Progress does not warrant ballasts, battery packs, lamps, photocells, occupancy sensors,

low voltage indicators, fuses, surge suppressors, surge protection devices, high intensity discharge (“HID”) components and

other third party devices that are not manufactured by Progress, which are covered by the applicable third party manufacturer

warranty (if any). Such third party manufacturer shall be solely responsible for the costs related to any claims associated with any

such devices. Warping of wooden or plastic blades is not covered by this Warranty. Metal ﬁnishes on Homestyle brand outdoor

Products are not covered by this Warranty.

Remedy: If the Product(s) fail to comply with the terms of this Warranty and the end user (and the purchaser of the Product(s)

if dierent from the end user) has fully complied with all of the obligations under this Warranty and the Terms and Conditions of

Sale for Progress (which are available at www.hubbelllighting.com/terms_and_conditions) including, without limitation, payment

in full in respect of the Products, Progress, at its sole option, will repair or replace the Product(s) with the same or a functionally

equivalent Product(s) or component part(s). Speciﬁcally, Progress will repair the Product, replace with a similar or like Product

(as determined by Progress in its sole discretion), or issue a credit to the purchaser which may be used for future Progress

product purchases. (The amount of such credit shall be calculated by Progress at its sole discretion). Progress reserves the

right to use new, reconditioned, refurbished, repaired or remanufactured products or parts in the repair or replacement of any

Summary of content (2 pages)

PAGE 1
PROGRESS LIGHTING LIMITED WARRANTY Limited Warranty (“Warranty”): Subject to the exclusions set forth below, Progress Lighting, Inc.
PAGE 2
Product covered by this Warranty. This Warranty excludes any and all removal or reinstallation costs and expenses including, without limitation, labor and equipment required to remove and/or reinstall original or replacement Product(s) or parts, shipping costs to return nonconforming Products(s) or any damage that may occur during the return of any Product(s) to Progress.