+ OGRESS IGHTING™ P350049-141 P350049-143 3-LT CONVERTIBLE PACKAGE CONTENTS SEMI-FLUSH MOUNT PART| DESCRIPTION QUANTITY A | Fixture 1 B | Shade 1 C | Knurled Ball Nut HARDWARE CONTENTS (not actual size) Screw Qty:2 f Wire nut Qty:3 Qiy:1 Round Mounting Plate Hex nut Qty:2 ® Cylinder nut Qty:2 Chain holder Qty:1 &) | Chain Qty:1 Canopy @ ? Chain loop (1/81P) Qty:1 o 9307278 Missing parts? Please contact Customer Service at 1-800-447-0573, am-8pm (Eastern}), Monday Friday, or at 6 Page: 1
A Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3. Unfold the fixture (A) and arrange to align with the shade (B). 3 4. Attach the shade (B) to the fixture (A) using the knurled ball nuts (C). (C) KnuredBallNut (M) X3 5. Pass the wires through the Chain loop Weave wires through chain (GG). Pass wires and chain through screw collar (LL) and canopy (HH). Open two links of chain and attach one end to chain loop (JJ) and the other end to chain holder (FF). Close the chain links.
Assembly Instructions wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the junction box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the round mounting plate. Push all wire connections int the outlet box. 6. Strip 3/8” of insulation from the electrical wire ends. Using 6 E@ Ribbed > Smooth 7.
