OGRESS LIGHTING 0350255 PACKAGE CONTENTS 2-LT FLUSH MOUNT PART| DESCRIPTION QUANTITY A | Fixture 1 B | Glass shade 1 C | Screw 3 HARDWARE CONTENTS (not actual size) Screw Wire nut Round Mounting Plate Hex Nut Cylinder Nut (48-32) Qty:2 Qy:3 Qty:1 Qty:2 Qly:2 THANK YOU for selecting Progress Lighting We can assist you with questions regarding product information, assembly or missing parts 800-447-0573 . A .
/1\ Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure comet branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3. You now need to adjust the screw length (AA) according to the fixture canopy depth. 5. Slide the mounting holes in the fixture (A) over the screws (AA) and using the cylinder nuts (EE), tighten the Lift up the fixture and pass the screws (AA) through the two | fixture against the ceiling surface. mounting heels in the fixture canopy. While holding the fixture with one hand, thread the screws (AA) in or out of the round mounting plate (CC) until 3/16" of threads are 5 showing.