AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3 3. Equally adjust the arms by carefully turning them out from the center. 4, Pass the wires through the chain loop 1). Weave wires through chain (GG). Pass wires and chain through screw collar (DD} and canopy (HH). Open two links of chain and attach one end to chain loop (J) and the other end to chain holder (EE). Close the chain links. Pass the wires through the chain holder/ threaded nipple/ mounting plate.
ASSEMBLY INSTRUCTIONS 6 6. Tuck the wires into the junction box and =r slip the canopy over the chain holder. Thread the screw collar (DD) onto the chain holder to secure the canopy tightly to the ceiling. 7. Place candle cover (B) and candle cap (C) onto fixture socket. Screw lamp (not included) into fixture socket. Use 60-watt MAX incandescent candelabra base, HSBC or SLED.
