+FROG REDS LIGHTING" P400047 4-LT CHANDELIER PACKAGE CONTENTS PART| DESCRIPTION QUANTITY P400047 A | Fixture 1 SER HARDWARE CONTENTS (not actual size) Hex nut | Wire nut | Mounting plate| Screw collar | Chain holder | Nipple | Chain | Canopy trainload 12" Pipe 6" Pipe (1/81P) (1/8IP) | (1/8IP) Qy1 | Quit Qty: Qy4 Qty: atty | Quirky Qty Qty: Qty Missing parts? Please contact Customer Service at 1-800-447-0573, Dd am-8pm (Eastern), Monday Friday, or at 93076408 Page:
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 4. Assemble nipples (KK) and pipes (HH, 1)) together to achieve a desirable hanging length, NOTE: Also at this time, you may choose to shorten the chain length and electrical/ground wires, but be sure to leave 6" minimum wire lengths beyond the canopy for connection. When completed, pass the wires through the assembled pipe lengths. Next attach assembled pipes onto fixture using a nipple (NN). Secure tightly.
ASSEMBLY INSTRUCTIONS Wire nut (= 6 3. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the junction box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting plate. Push all wire connections into the outlet box. 7. Tuck the wires into the junction box and slip the canopy over the chain holder.