PROGRESS o P400097-141 SIGHTING P400097-143 4-LT ISLAND PACKAGE CONTENTS PART| DESCRIPTION |QUANTITY A | Fixture 1 B | Pipe 2 C | Canopy 1 D | Body 1 HARDWARE CONTENTS (not actual size) Nipple Wire Mounting plate| Hex nut | Screw | Flat washer Finial Chain Screw (1/4P) connector (1/4IP) (1/4P) | (#8) (1/4P) (72) | #832 Qiy:1 Qty:3 Qty:1 Qty | Qty Qty: Qty: Qty:2 Qty THANK YOU for selecting Progress Lighting We can assist you with questions regarding product information, assembly or missing parts 800-447-057
/I\ SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble,operate or install the product. CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor WARNING: If any Special Control Devices are used with this Fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3. Use a drill with a #29 (3.5mm) bit to create mounting holes in the junction box. Next attach flat washer (FF) and support cable onto junction box using screw (EE) to secure tightly. Hardware Used G3) Screw FP Flat washer 4. Attach assembled parts from step 1 onto junction box, using the mounting screws supplied with the junction box (not included). 5. Strip 3/8” of insulation from the 6. Attach canopy (E) onto nipple (AA) | 7. Screw lamps (not included} into electrical wire ends.
