{PROGRESS P400202-009 LIGHTING P400202-031 PACKAGE CONTENTS 5-LT CHANDELIER PART| DESCRIPTION QUANTITY A | Fixture 1 B | Stem 1 C | Candle cover 5 D | Tube 5 HARDWARE CONTENTS (not actual size) Wire nut Mounting strap Nipple Hex nut Screw collar | Chain holder 72" Chain (1/81P) (1/81P) (1/8IP) (1/81P) Qty Qty:1 Qty:1 Qty Oty: Oty: Quy Booty Missing parts? Please contact Customer Service at 1-800-447-0573, Dd am-8pm (Eastern), Monday Friday, or at 93123455 Page:1
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3. Adjust the round arms. 4, Attach tube {D} to fixture {A) and secure tightly. 5. Pass the wires through the stem {B) and secure tightly onto fixture (A). Weave wires through chain {HH). Pass wires through screw collar (EE) and canopy (GG). Open two links of chain and attach one end to stem (B) and the other end to the chain holder (FF). Close the chain links. Pass the wires through the chain holder/ threaded nipple/crossbar.
Assembly Instructions 6. Strip 3/8” of insulation from the electrical wire ends. Using 0 wire nuts (BB), connect RIBBED fixture wire to the WHITE = supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. wire nut (= x3 Ribbed Smooth 7.
