+FROG REDS LIGHTING” P400235-031 P400243-031 3-LT CHANDELIER 5-LT CHANDELIER PACKAGE CONTENTS QUANTITY PART| DESCRIPTION PA00235 PA002A3 A | Fixture Glass shade Socket ring 3 5 D |Stem Stud Cylinder nut 6 10 P400243 HARDWARE CONTENTS (not actual size) Hex nut | Wire nut | Mounting strap | Screw collar | Chain holder | Nipple | Chain | Canopy |Chain loop 6" Pisa | Nipple (1/81P) (1/8IP) | (1/81P) | (1/81) | (1/8IP) atty | Qty Qty:1 Qty:1 Qy1 | Quirky | Qty Qty: | Booty | Qty Qty Missing parts? Please contact
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3 A 3. Attach stem (D) onto fixture (A) to secure tightly. Attach rectangular arm of fixture (A) fo stem (D). Using stud (E) and cylinder nut (F) to secure tightly. 4. Pass the wires through the one pipe pipes (KK) and chain loop (JJ) to achieve overall desired length. Next attach pipes onto fixture (A) to secure tightly. Weave electric cord and ground wire through chain collar (HH). Open two links of chain and attach both ends to chain holder loop (JJ). Close the chain links.
Assembly Instructions 5. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. Wire nut (= x3 6. Tuck the wires into the outlet box and slip the canopy over the chain holder.
