PROGRESS IGHTING™ P400274-009 P400275-009 P400276-009 P400274-031 P400275-031 P400276-031 3-LT CHANDELIER 5-LT CHANDELIER ~~ 9-LT 2-TIER PACKAGE CONTENTS CHANDELIER QUANTITY PART| DESCRIPTION P400274 | PA00275| P400276 A | Fixture Glass shade Socket ring Stem P400274 P400275 P400276 —A) figment HARDWARE CONTENTS (not actual size) ® 5 Hex nut Wire nut Mounting plate | Screw collar Chain holder Nipple Chain Canopy Qty:2 Qty:3 Qty Qty: Qty Qty Qty Qty Missing parts? Please contact Customer Service at 1-800-447
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3 3. Equally adjust the arms by carefully turning them ~ 7 3 out from the center. s ~ / P400274 P400275 P400276 Note: Glass down center pipe assembly which is shown in Step the same as glass up 4 gown in Step 4 (P400274} is th | center pipe assembly (P400275 & P400276). 4, Pass the wires through the Chain loop of the stem (D). Attach stem (D) onto the nipple of the fixture (A) to secure tightly. As you do this, you will need to pull up the slack on the cord. 5 5.
ASSEMBLY INSTRUCTIONS 6. Strip 3/8" of insulation from the electrical wire ends. Using wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting plate. Push all wire connections into the outlet box. Wire nut Tuck the wires into the outlet box and slip the canopy over the chain holder.
