OGRESS P400285-009 P400285-31M 5-LT CHANDELIER LIGHTING” PACKAGE CONTENTS PART| DESCRIPTION |QUANTITY A | Fixture 1 B | Stem 1 C | Candle cover 5 D ironing 1 E | Ball nut 5 — 4 HARDWARE CONTENTS (not actual size) A Wire nut Qty:3 Mounting strap (1/81P) Qty:1 € Nipple (1/81P) Qty:1 Hex nut (1/81P) Qty:2 © Screw collar Qty:1 Chain holder (1/8IP) Qty:1 Canopy Qty:1 Chain (72) Qty:1 Quick link Qiy:1 93135400 Page:1 Missing parts? Please contact Customer Service at 1-800-447-0573, OD am-8pm (Eastern), Monday Fri
/I\ SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble,operate or install the product. CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 80°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor WARNING: If any Special Control Devices are used with this Fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS oo 3. Adjust the round arms. 4. Attach iron ring (D) to fixture (A) and secure tightly with ball nut (E). 5. Pass the wires through the stem (B) and secure tightly onto fixture (A). Weave electric cord and ground wire through chain (HH) and quick link (1). Pass wires and chain through, screw collar (EE) and canopy (GG). Open one link of chain (HH) and attach to stem loop (B). Close the chain link. Attach the other end of the chain to the chain holder (FF) using quick link (JJ).
ASSEMBLY INSTRUCTIONS 4.Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (AA), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. (a8) Wire nut (= X3 7.
