IGHTING™ PROGRESS PACKAGE CONTENTS 5-LT CHANDELIER PART| DESCRIPTION QUANTITY A | Fixture 1 B | Glass shade 5 C | Socket ring 5 D | Stem 1 E | Tube 1 F | Check ring 1 G | Pipe 1 HARDWARE CONTENTS (not actual size) @ | m Hex nut Wire nut Qty:2 Qty:3 Mounting plate Qiy:1 Screw collar Qty:1 Chain holder Qty:1 Nipple Qty Qty-1 0 Quick link Qty Canopy Qty:1 93135087 Page: Missing parts? Please contact Customer Service at 1-800-447-0573, Dd am-8pm (Eastern), Monday Friday, or at
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3 3. Equally adjust the arms by carefully muting them out from the center. 4. Pass the wires through the stem (D), tube (E), check ring (F), pipe (G). Then screw stem (D) into fixture (A), attach tube (E) ,check ring (F) on to stem (D) , use pipe (G) to secure tightly. 5. Weave wires through chain (GG) / quick link {HH). Pass wires and chain through screw collar {DD) and canopy (JJ). Open one link of chain and attach it to chain loop, close the chain link.
ASSEMBLY INSTRUCTIONS Wire nut (= x3 6. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. 7. Tuck the wires into the outlet box and slip the canopy over the chain holder.
