REDS P400193-031 P4217-09 P4217-20 SIGHTING" 5-LT CHANDELIER WITH PACKAGE CONTENTS DRUM SHADE PART| DESCRIPTION | QUANTITY A | Fixture 1 B | Shade 1 C | Candle Cover 5 D | Pipe 1 E | Body HARDWARE CONTENTS (not actual size) & U Hex nut | Wire connector (1/81P) Qty:2 Qty 1/8IP Mounting strap Qty:1 Screw collar Qty:1 &® olive@ Chain holder | Nipple | Chain | Canopy | Chain loop {1/8IP) (1/81P) | (72) (1/81P) Oyl Oyl | Qi 93047497 Page:1 Missing parts? Please contact Customer Service at 1-800-447-0573, @ am-8p
/I SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
Assembly Instructions 3. Attach shade (B) on to fixture (A). Attach one end of pipe (D) to fixture (A} and other end te the body (E). Pass wires through chain loop Weave wires through chain (GG). Pass wires through screw collar {DD} and canopy (HH). Open two links of chain and attach one end to chain loop (1)) and the other end to the chain holder (EE}. Close the chain links. Pass the wires through the chain holder/ threaded nipple/mounting strap.
Assembly Instructions 6. Tuck the wires into the junction box and slip the canopy {HH) over the chain holder. Thread the Screw collar (DD) onto the chain holder to secure the canopy tightly to the ceiling. 5. Strip 33 * of insulation from the electrical wire ends. Using wire connector {BB), connect RIBBED fixture wire to the WHITE supply wire from the junction box; connect the SMOOTH fixture wire to the BLACK supply wire.
