REDS P500023-141 SIGHTING” P500023-143 4-LT CONVERTIBLE PACKAGE CONTENTS SEMI-FLUSH MOUNT PART| DESCRIPTION QUANTITY A | Fixture 1 B | Shade 1 C | Knurled ball nut 3 HARDWARE CONTENTS (not actual size) &) @ 5 Hex nut Wire nut Mounting strap | Screw collar Chain holder Nipple Chain Canopy Qty:2 Qty Qty Qty:1 Qty Qty Qty Missing parts? Please contact Customer Service at 1-800-447-0573, @ am-8pm (Eastern}), Monday Friday, or at 93073082 Page: 1
A Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure comet branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.
Assembly Instructions 3. Unfold the fixture (A) and arrange to align with the shade (B). 3 4. Attach the shade (B) to the fixture (A) using the knurled ball nuts (C). @ Knurled ball nut () X3 5. Pass the wires through the chain loop Weave wires through chain (GG). Pass wires and chain through screw collar (LL) and canopy (HH). Open two links of chain and attach one end to chain loop (JJ) and the other end to chain holder (FF). Close the chain links.
Assembly Instructions 6. Strip 3/8" of insulation from the electrical wire 6 ends. Using wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the junction box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. Wire nut E X3 7.
