+ OGRESS IGHTING™ P500041-020 P500041-143 1-LT MINI-PENDANT PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B_| Canopy 1 Cg HARDWARE CONTENTS (not actual size) Screw Qty:2 i Wire nut Qty:3 Round Mounting Plate Qty:1 Hex nut Qty:2 ® Cylinder nut Qty:2 Chain (6 links) Qty:1 © 9 Chain loop (1/8IP) Qty:2 i 12" Pipe (1/81P) Qty:4 6" Pipe (1/81P) Qty:1 Nipple (1/81P) Qty:5 o Missing parts? Please contact Customer Service at 1-800-447-0573, am-8pm (Eastern), Monday Friday, or at 93076407 Page:
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3. Pass the wires through the nipple pipe four pipe {HH) to achieve overall desired length. Next attach pipe onto fixture use nipple (KK) to secure tightly. Weave electric cord and ground wire through chain (FF) and chain loop (GG). Open two links of chain and attach both end to chain loops (GG), close the chain links. NOTE: During this step, you may choose to shorten the chain and electrical/ground wires. X1 4. Strip 3/8" of insulation from the electrical wire ends.
