PROGRESS SIGHTING" PS0D178 4-LT FOYER PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B | Stem 1 C | Metal frame 1 HARDWARE CONTENTS (not actual size) Hex Nut | Wire Nut | Mounting Strap| Screw Collar | Chain Holder | Nipple 5 Chain | Chain 12" Pipit 6" Pips | Nipple | Canopy Loop | (1/8IP) | (1/81P) Qy2 | Qty Qty Qty Booty | Qty! | Quirky | Booty | Qy4 | Qty! |Qiy4 | Git THANK YOU for selecting Progress Lighting We can assist you with questions regarding product information, assembly or missing p
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3 4. Attach fixture (A) to the metal frame (C} and use the stem (B) to secure it tightly. NOTE: During this step, determine the hanging length of your fixture by adding or removing pipes and chain links. The electrical and ground wire may also optionally be cut to length. Do NOT cut electrical or ground wires until this length is determined. Leave AT LEAST 6 inches MINIMUM of wire past the chain holder (EE) to allow for easy connections in step 6.
ASSEMBLY INSTRUCTIONS 6. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (BB), connect the RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. 7. Tuck the wires into the outlet box and slip the canopy (MM) over the chain holder.
