PRIG REDS P500296-009 LIGHTING P500296-031 PACKAGE CONTENTS 3-LT FOYER PENDANT PART| DESCRIPTION QUANTITY A | Fixture 1 B | Screw 8 C | Round square frame 1 D | Finial HARDWARE CONTENTS (not actual size) ®) A S|) boo Wire nut | Mounting strap | Nipple Hex nut | Screw collar | Chain holder | Canopy 72" Chain | Quick link | Chain loop (1/8IP) (1/8IP) | (1/81P) (1/8IP) Qy:3 Qty: ay1 | Qty Qty: Qty: Qty Qty: Qy1 | Qi Missing parts? Please contact Customer Service at 1-800-447-0573, Dd am-8pm (Eastern), Monday F
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3 3. Adjust the ams. 4. Install the finial {D} on the fixture {A} until tight. §. Attach round square frame {C) to fixture (A). Using screw (B) to secure tightly. Pass wires through chain loop (KK), attach chain loop (KK) to fixture {A) secure tightly. Weave electric cord and ground wire through chain (HH). Pass wires through screw collar (EE} and canopy (GG). Open one link of chain and attach one end to chain loop (KK). Close chain link.
Assembly Instructions . Strip 3/8" of insulation from the electrical wire ends. Using wire nuts { ), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. () went x 8.
