PROGRESS IGHTING™ P500308-031 4-LT PENDANT P400244-031 5-LT CHANDELIER PACKAGE CONTENTS QUANTITY TIPTOP PART| DESCRIPTION PS00308 | P400244 A | Fixture Wicker shade 1 1 P500308 HARDWARE CONTENTS (not actual size) @) Hex nut (1/81P) Qty:2 Wire nut | Mounting plate Qty Quirky Screw collar Qty:1 ® Chain holder| Nipple (1/81P) (1/81P) Qty:1 Qty:1 Chain Qiy:1 ™ B Quick-link Qty:1 Chain loop (1/81P) Qty-1 | I Pipe Qty:1 Canopy Qty-1 o Missing parts? Please contact Customer Service at 1-800-447-0573, am-8pm (Easte
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS P500308 3. Adjust the arms by carefully turning them out from the center. 4. Pass the wires through the pipe (KK) and chain loop (J). Attach the pipe {KK} onto fixture {A} to secure it tightly. Weave wires through chain (GG). Pass wires and chain through screw collar (DD) and canopy (LL). Open one link of chain and attach this end to chain loop (JJ). Close the chain link. Attach the other end of the chain to chain holder (EE) using quick-link {HH) to secure tightly.
ASSEMBLY INSTRUCTIONS 6 6. Tuck the wires into the outlet box and slip the canopy over the chain holder. Thread the screw collar (DD) onto the chain holder to secure the canopy tightly to the ceiling. 7 7. Place wicker shade (B) onto fixture (A). Screw lamps (not included) into fixture socket. Use 60-watt MAX incandescent medium base lamp, lI HSBC or SLED.
