+PROGRESS LIGHTING” 1-LT 8" GLASS GLOBE 1-LT 10" GLASS GLOBE ~~ 1-LT 12" GLASS GLOBE PACKAGE CONTENTS PENDANT PENDANT PENDANT QUANTITY PART DESCRIPTION P500309 | P500310| P500311 A | Fixture Glass globe Glass cover Knurled nut Slip finial (or— S500 = P500309 P500310 P500311 HARDWARE CONTENTS (not actual size) Hex nut Wire nut Mounting strap | Knurled nut Slip finial Nipple Canopy Strain relief Qty:2 MySQL Quirky Qly:1 Qty Qiy:1 Qty Qiy:1 Missing parts? Please contact Customer Service at 1-800-447-0573, Dd a
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3 3. Pass the wires through the slip finial (EE)/ knurled nut (DD)/ canopy (GG)/ nipple and strain relief (HH). Tie a knot at the end of the fixture wire. NOTE: During this step, you may choose to shorten the electrical/ ground wires. Hardware Used Knurled nut x1 Ee Slip finial = x1 ©s Canopy X1 (HH) Strain relief x1 4 4. Strip 3/8” of insulation from the electrical wire ends.
ASSEMBLY INSTRUCTIONS 6. Screw lamp (not included) into fixture socket {A}. Use 60-watt MAX incandescent medium base lamp, HSBC or SLED. 6 7. Attach glass globe (B) to fixture. Place glass cover (C) to fixture using knurled nut (D) and slip finial (E} to secure tightly. WARRANTY AND EXCLUSIVE REMEDY: Progress products, when properly Installed and under normal conditions of use, are wa ranted to our customers only to be free from defects In material and workmanship at ime of shipment.
