+FROG REDS LIGHTING 1-LT PENDANT PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B | Steel Chain 3 C | Quick Link 3 D | Frame 1 HARDWARE CONTENTS (not actual size) Hex nut Wire nut Mounting strap | Screw collar | Chain holder | Nipple | Chain Quick Chain Canopy 2" link loop Qty:2 Qty:3 Qty:1 Qty:1 Qty:1 Qty:1 Qty:1 Qty:1 Qty:1 Qty:1 THANK YOU for selecting Progress Lighting oO We can assist you with questions regarding product information, assembly or missing parts 800-447-0573 93129419 Page:1 am-
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3 3. Use the quick links {C) to connect the chain (B) to the frame (D). Ensure that the quick links are tightened completely. el 4. Weave wires through chain (GG). Pass wires and chain through screw collar (DD) and canopy (KK). Open one link of chain and attach it to chain loop (lJ), close the link; and the other end lock to chain holder (EE) use the quick link (HH) to secure tightly. Pass the wires through the chain holder/ threaded nipple/ mounting plate.
ASSEMBLY INSTRUCTIONS 5. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. Wire nut (= X3 6. Tuck the wires into the outlet box and slip the 6 canopy over the chain holder.
