{PROGRESS LIGHTING P500348-163 1-LT PENDANT PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B | Stem 1 C | Tubing 1 D | Checking 1 E | Chain loop 1 HARDWARE CONTENTS (not actual size) ofl | om® B Hex nut | Wire nut | 1/8IP Mounting strap | Screw collar | Chain holder | Nipple | Chain Canopy Quick link Qty:2 Qty:3 Qty:1 Qty:1 Qty:1 Qty:1 Qiy:1 Qty:1 Qty:1 THANK YOU for selecting Progress Lighting We can assist you with questions regarding product information, assembly or missing parts Dd 800-447-05
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions MEd 3. Pass the wires through the stem ring loop (E). Screw stem (B) to fixture (A) and secure tightly. Attach tubing (C) to stem (B). Attach check ring (D) and chain loop (E) to the stem (B), secure tightly. 4. Weave wires through chain (GG). Pass wires and chain through screw collar {DD} and canopy (HH). Open one link of chain and attach to chain loop (E), Close the chain links. Attach the chain holder (EE) to the other end of the chain using quick link (JJ) to secure.
Assembly Instructions 5. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. Wire nut (= x3 6. Tuck the wires into the outlet box and slip the canopy over the chain holder.
