+FROG REDS P500349-028 LIGHTING” P500349-31M P500349-060 1-LT PENDANT PACKAGE CONTENTS PART| DESCRIPTION QUANTITY Fixture 1 B | Cap Glass shade Hex nut Cover 1 1 | J HARDWARE CONTENTS (not actual size) {/8/a Screw | Wire nut| Round mounting plate | Hex nut | Cylinder nut | Black fiberglass | 12” Pipe | 6" Pipe | Nipple Canopy sleeting (1/81P) | (1/8IP) Qty:2 Qty:3 Qty:1 Qty:2 Qty:2 Qty:1 Quid | Qty | Qty:5 Qty:1 THANK YOU for selecting Progress Lighting © We can assist you with questions regarding product i
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3. Pass the wires through the one pipe pipes (GG) and black fiberglass sleeting (FF) to achieve overall desired length. Next attach one end pipes onto fixture (A) to secure tightly. Weave electric cord and ground wire through the fiberglass sleeting (FF) and canopy (KK). Last, attach other end of pipes {GG) to canopy and secure tightly. NOTE: During this step, you may choose to shorten the chain and electrical/ground wires.
Assembly Instructions 6. Screw lamp (not included) into fixture socket. Use 60-watt MAX incandescent medium base lamp, HSBC or SLED. 7. Pass cap (B) and glass shade (C) onto the fixture (A). Next attach cover (E) to glass shade (C) onto the fixture nipple (A) using the hex nut (D) and the finial (F). Secure tightly.
