+PROGRESS LIGHTING” P500384 1-LT PENDANT P500385 1-LT PENDANT PACKAGE CONTENTS QUANTITY TIPTOP PART| DESCRIPTION P500384 | P500385 A | Fixture Socket Cup Glass Shade Metal Shade 1 P500384 DO— P500385 HARDWARE CONTENTS (not actual size) Screw | Wire Nut | Round Mounting Plate | Hex Nut (Knurled ball nut | Chain (Chain Loop| 12" Pipe | 6"Pipe | Nipple (48-32) (#832) (links) | (BP) | (PUBIS) | (18) | (18IP) Qy2 | ays Qty! atty Qty ay1 | Qyz2 Qy4 Qyl | Qs THANK YOU for selecting Progress Lighting Dd 800-447-057
/I\ Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
Assembly Instructions 3 NOTE: During this step, determine the hanging length of your fixture by adding or removing stems and chain links. The electrical and ground wire may also optionally be cut to length. Do NOT cut electrical or ground wires until this length is determined. Leave AT LEAST 6 inches MINIMUM of wire past the canopy chain loop (GG) to allow for easy connections in step 4. {Chain links can be spread open with 2 pairs of pliers.
Assembly Instructions 5 5. Pass the screws through the two holes in the canopy. Secure the fixture (A) to the screws (AA) using the two knurled ball nuts (EE), and tighten securely. 6a. Attach the glass shade (C) to the fixture (A) using the socket cup (B) to secure it tightly. Thread the lamp (not included) into the fixture socket. Use 100-watt MAX incandescent medium base lamp, HSBC or SLED. 6b. Attach the metal shade (D) to the fixture (A) using the socket cup (B) to secure it tightly.
