PROGRESS IGHTING™ P550083-031 P550083-141 1-LT OUTDOOR PENDANT PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture Glass shade Socket spacer Socket ring 1 E | Canopy 1 SS HARDWARE CONTENTS (not actual size) ° Screw Qty:2 i Qty:3 Wire nut | Round mounting plate | Hex nut (18-32) Qty:1 Qy2 J Cylinder nut Qty:2 Chain (6 links) Qty:1 Chain loop (1/8IP) Qty:2 12" Pipe (1/81P) Qty:4 Nipple (1/81P) Qty:5 o Missing parts? Please contact Customer Service at 1-800-447-0573, am-8pm (Eastern), Monday Friday, or at
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3. Pass the wires through the nipple pipe pipe {HH) and Chain loop (GG) to achieve overall desired length. Next attach pipe onto fixture (A) use nipple (KK) to secure tightly. Weave electric cord and ground wire through chain loop (GG) and chain (FF). Open two links of chain and attach both ends to chain loops {GG). Close the chain links. NOTE: During this step, you may choose to shorten the chain and electrical/ground wires.
Assembly Instructions 6 6. Attach glass shade (B} to fixture (A) using socket spacer {C} and socket ring (D) to secure tightly. Screw lamp (not included) into fixture socket. Use 100-watt MAX incandescent medium base lamp, HSBC or SLED. tel | WARRANTY AND EXCLUSIVE REMEDY: Progress products, when properly Installed and under normal conditions of use, are warranted to aur customers early ta be free from defects In materiel and workmanship at time of shipment.
