{PROGRESS LIGHTING P550084-151 PACKAGE CONTENTS 1-LT OUTDOOR WICKER PENDANT PART| DESCRIPTION QUANTITY A | Fixture 1 B | Glass Shade 1 C | Socket Cup 1 D |Cage 1 E | Finial 3 HARDWARE CONTENTS (not actual size) Screw Qty:2 i Qty:3 Wire nut | Round Mounting Plate Qty:1 = @ Hex nut Qty:2 ® (® Cylinder nut Qty:2 Chain (6 links) Qty:1 Chain loop | 12" Pipe 6" Pipe Nipple (1/8IP) (1/8IP) (1/8IP) (1/8IP) Qty:1 Qty:4 Qty:1 Qty:5 o Missing parts? Please contact Customer Service at 1-800-447-0573, am-8pm (Eastern),
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3 3. Attach glass shade (B} to socket using socket cup {C) to secure tightly. Attach cage (D) to fixture (A) using finial {E} to secure tightly. 4. Pass the wires through the nipple pipe four pipe (HH) and chain loop {GG) to achieve overall desired length. Next attach pipe onto fixture using nipple (KK) to secure tightly. Weave electric cord and ground wire through chain (FF) and chain loop (GG). Open two links of chain and attach both ends to chain loops (GG). Close the chain links.
Assembly Instructions 4. Strip 3/8” of insulation from the electrical wire ends. Using 5 wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the round mounting plate. Push all wire connections into the outlet box. Wire nut (= x3 Ribbed 6.
