P550097 1-LT OUTDOOR PENDANT +FROG REDS LIGHTING” PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B | Glass shade 1 C | Lamp body 1 D | Screw 2 HARDWARE CONTENTS (not actual Cc —® Hex nut Wire nut 1/81P Qty:2 Qiy:3 Mounting strap | Screw collar 1/8/P Qiy:1 Qty: Chain holder 1/8IP Qty Nipple 1/8IP Qty-1 Chain ) Qty o 93131120 Missing parts? Please contact Customer Service at 1-800-447-0573, am-8pm (Eastern), Monday Friday, or at Page:1
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3. Screw lamp (not included) into fixture socket. Use 100-watt 4. Weave wires through chain (GG). Pass wires MAX incandescent medium base lamp, HSBC or SLED. and chain through screw collar (DD) and canopy (HH). Open two links of chain and attach one end Attach glass shade(B) into lamp body(C). Secure lamp s . body(C) to the fixture(A) using the two screw(D). Tighten to chain loop (JJ) and the other end to chain securely. holder (EE). Close the chain links.
ASSEMBLY INSTRUCTIONS 5. Strip 3/8" of insulation from the electrical wire ends. Using wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. Wire nut (= X3 8. Tuck the wires into the junction box and slip the canopy) over the chain holder.