Installation Guide

SAFETY TIPS
Turn fixture off! (Place wall
switch in off position, if fixture
has built-in switch or chain pull,
switch or pull chain so fixture is
off.)
Next - go to the main fuse box.
If your fuse box has an ON/OFF
switch, simply place main power
switch in OFF position.
Screw-in type fuses - unscrew
the fuse or fuses that control the
power to the fixture or room you
are working in.
READ IMPORTANT SAFETY TIPS BEFORE PROCEEDING WITH INSTALLATION
INSTALLATION INSTRUCTIONS
ATTACH cross bar to outlet box with outlet box
screws (8-32x1/2, 2 slotted screws provided).
IS009
2
1
CONNECT THE WIRES. NOTE: Attach black fix-
ture wire to black supply wire, white fixture wire to
white supply wire. Do not mix them up. Use
approved electrical tape or wire connectors (not
provided). Connect bare fixture ground wire to
ground wire from outlet box. NEVER CONNECT
GROUND WIRE TO BLACK OR WHITE POWER
SUPPLY WIRES.
3
outlet box
outlet box
screws
ground
wire
cross bar
ground
wire
wire connectors
(not provided)
POSITION THE FIXTURE over the outlet box and
secure in place with the mounting screw (1/4-20x1, 1
provided). Screw bulb into socket (if installing fluores-
cent fixture simply insert bulb into socket). Be sure to
use bulb with wattage no greater than specified for
this fixture.
cross bar
mounting
screw
washer