PROGRESS IGHTING™ LED LOUVER STEP LIGHT WITH PHOTO SENSOR P660006-XXX-30 P660007-XXX-30 PACKAGE CONTENTS LED HOOD STEP LIGHT WITH PHOTO SENSOR PART| DESCRIPTION QUANTITY A | Front cover vertical 1 B | Front cover horizontal 1 C | LED Assembly 1 D | Gasket 1 P660007-XXX-30 P660006-XXX-30 Wire nuts Cover screws atty o THANK YOU for selecting Progress Lighting We can assist you with questions regarding product information, assembly or missing parts Page: SD am-8pm (Eastern), Monday-Friday 800-447-0573 N—
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
Assembly Instructions 3. Apply the gasket (D) onto the desired front cover (A or B). Next align the front cover the LED assembly (C), making sure that the the photo sensor hole on the front cover {A or B) matches up with the with the photo sensor on the LED assembly (C).
