WALL FIXTURE SIGHTING" PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B | Louver 1 C | Mach screw 2 HARDWARE CONTENTS (not actual size) (1/81P) f Nipple Wire nut Qty:1 Qty:3 Mounting strap Qty:1 0 Cap nut (1/81P) Qty:1 022705 Page:1 Missing parts? Please contact Customer Service at 1-800-447-0573, @ am-8pm (Eastern}), Monday Friday, or at
A Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3. Si rip 3/8" of insulation from the electrical wire ends. Using wire nuts (BB), connect white fixture wire to the white supply wire from the outlet box; connect the black fixture wire to the black supply wire. 3 Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outset box. Wire nut (= X3 4, Attach fixture (A) to nipple {AA) use cap nut {DD) to secure tightly.
