OGRESS LIGHTING™ P730001-030-30 2FT LED STRIP 4FT LED STRIP PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Housing 1 B | Fixture 1 ATTACH YOUR RECEIPT HERE Purchase Date HARDWARE CONTENTS (not actual size) @ Wire nut Wall plug Wood screw Mounting plate atty Qty:2 Qty:2 Qiy:1 Missing parts? Please contact Customer Service at 1-800-447-0573 or @ am-8pm (Eastern), Monday Friday 93115711 Page:1
& Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS < Flat head screw driver {(not included) 3. Remove the knockout from housing (A) . 5. Drill (2) @1/4 holes for wall plug, insert wall plug (BB) into to wall, attach housing (A) to wall plug, using wood screw (CC) to secure tightly. Hardware Used Wall plug @% X2 @ Wood screw e X2 4. Strip 3/8” of insulation from the electrical wire ends.
ASSEMBLY INSTRUCTIONS 6 6. Attach fixture (B} safety hook to housing (A). Connect fixture wires to housing wires by reconnecting the terminal. 7 Install fixture (B) to housing (A) by applying uniform pressure along the fixture until it snaps in. Be sure all wires and safety cables are securely in channel to avoid being pinched. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.