OGRESS LIGHTING™ P730011-030-30 P730012-030-30 2FT LED WRAP 4FT LED WRAP PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B | Back plate 1 P730011 P730012 ATTACH YOUR RECEIPT HERE Purchase Date HARDWARE CONTENTS (not actual size) @ Wall plug Wood screw Wire nut atty Qty:2 Qty:3 Missing parts? Please contact Customer Service at 1-800-447-0573 or @ am-8pm (Eastern), Monday Friday 93115714 Page:1
& Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 80°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3 3. Hook the fixture (A) to back plate (B) using safety cable. 4. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (CC), connect WHITE fixture wire to the WHITE supply wire from the junction box; connect the BLACK fixture wire to the BLACK supply wire. Connect the fixture ground wire, ground wire from back plate and supply ground wire using a wire nut. Push all wire connections into the outlet box. 5. Snap in the fixture (A) to back plate (B).
