Cut Sheet
Incandescent 6” Housing Recessed
IC, Non-IC, & Air Tight
Type
P87-AT
Dimensions (Inches)
Catalog No. Lamping A B C
P87-AT See Trim Specifications 7-7/8 10-3/4 7-1/2
Ceiling Opening 6-7/8
Specifications:
Wiring
•
Universal junction box with snap-out sides
• Removable housing for field inspection
of wiring
• Grounding pigtail
• Knockout free Romex clamps
• 1/2” & 3/4” Knock outs for rigid or BX
fittings
Construction
• Housing adjusts from 1/2” to 2-1/2” for
thick ceilings
• Full wrap-around plaster frame
• Removable K.O. for remodel use (P8607-
01 plaster frame clips also required)
• Galvanized steel construction
• Porcelain socket with nickel-plated brass
screw shell
•
Notched housing for chalkline alignment
• Overspray protection
• Socket can be used as a temporary work
light with ‘A’ lamp
Bar Hangers
• Integral nailers for wood joist
construction
• Integral T-bar mounting clamps
• Span 24” T-bar spacing
• Lock to secure housing
• Captive
• 90-degree mounting for tight spaces
Labeling
• IC and Non-IC rated
• Complies with Washington State Energy
Code (WSEC) requirement for air tight
• UL-CUL listed for damp location and
through branch wiring
• Approved for use in New York City per
calendar #40330.
Lamp/Trim
• Socket mounts to trim for optimum
performance and consistent lamp
position
• Trim-Lok
®
action forces trim to fit snugly
against the ceiling
Progress Lighting
701 Millennium Blvd.
Greenville, South Carolina
29607
www.progresslighting.com
Rev. 2/06
Patent#
5758959
P87-AT
C
A
B