(P87-ATQC) Specification Sheet

Incandescent 6” Housing Recessed
IC, Non-IC, & Air Tight
Type
P87-AT
Dimensions (Inches)
Catalog No. Lamping A B C
P87-AT See Trim Specifications 7-7/8 10-3/4 7-1/4
Ceiling Opening 6-7/8
Specifications:
Wiring
Universal junction box with snap-out sides
Removable housing for field inspection
of wiring
Grounding pigtail
Knockout free Romex clamps
1/2” & 3/4” Knock outs for rigid or BX
fittings
Construction
Housing adjusts for ceiling thickness
from 1/2” to 1-1/2” thick
Full wrap-around plaster frame
Removable K.O. for remodel use (P8607-
01 plaster frame clips also required)
Galvanized steel construction
Porcelain socket with nickel-plated brass
screw shell
Notched housing for chalkline alignment
Overspray protection
Socket can be used as a temporary work
light with ‘A’ lamp
Bar Hangers
Integral nail for wood joist construction
Integral T-bar mounting clamps
Spans 24” T-bar suspended ceilings
Lock to secure housing
Captive with joist alignment tabs
90-degree mounting for tight spaces
Labeling
IC and Non-IC rated
• Performance tested to ASTM E283 Air
Tight requirements, including IECC, CA
Title 24 and Washington State Energy
Codes
UL-CUL listed for damp location and
through branch wiring
Approved for use in New York City per
calendar #40330.
Lamp/Trim
Socket mounts to trim for optimum
performance and consistent lamp
position
Trim-Lok
®
action forces trim to fit snugly
against the ceiling
Progress Lighting
701 Millennium Blvd.
Greenville, South Carolina
29607
www.progresslighting.com
Rev. 11/13
Patent#
5758959
A
B
C
Side view

Summary of content (3 pages)