Specification Sheet

For more information visit our website: www.progresscommercial.com
Progress Lighting • 701 Millennium Boulevard • Greenville, SC 29607
Images:
Specifications:
Description:
Catalog number:
Designed for indoor installation in commercial or industrial applications, the PECLB
Series micro inverter system provides Emergency AC power to lighting fixtures equipped
with incandescent, fluorescent, CFL or LED lamps between  and  watts for  minutes.
The lighting load can be installed at a distance of up to  feet from the micro inverter.
The enclosure is constructed of heavy-duty,  gauge steel with a white powder-coat finish.
Features:
• Dual input voltage / VAC,  Hz
• Overload and Short Circuit Protection
• Manual “TEST” button
• LED indicators for “AC-ON”, “Charging-ON” and “Inverter-ON”
• Sealed lead calcium batter with a  year rated life
Project:
Fixture Type:
Location:
Contact:
Dimensions:
PECLB SERIES
Central Lighting Micro Inverter
PECLB- PECLB-
Power Rating  VA/W  VA/W
Power Factor .
Temperature Range ºC -ºC (ºF - ºF)
Weight  LB  LB
Max Input Current
 VAC: .A
 VAC: .A
 VAC: .A
 VAC: .A
System Voltage  VDC
Recharge Time  Hours
Base Capacity
PECLB
Operation:
When normal utility supplied power is interrupted, the PECLB Series micro inverter unit will
automatically transfer to emergency mode in less than  second and begin supplying AC
power to the load for  minutes. The unit is capable of operating normally on, normally off,
or switched loads. A low voltage battery disconnect circuit will prevent “deep discharge” dam-
age to the battery. AC lockout prevents battery discharge prior to initial unit power-up. The
charging circuit will bring the batteries to full recharge within UL time standards. A “brown-
out” circuit will automatically transfer the unit to emergency power if the utility voltage falls to
a predetermined “low line” limit.
Warranty:
• Unit and Electronics (not including fuses):  years full
• Battery:  years full,  years pro-rata
Compliances:
• UL
• NFPA  and NFPA 
• OSHA, State and Local Code compliant
Surface Mount Model
32   VA/W
55   VA/W
Finish
30  White
Mounting
S Surface Wall
T Recessed Ceiling T-Grid
Surface Mount Housing
Recessed Mount Housing
7.38”
14.75” 4.38”
3.13”
(models
LPS-20
& LPS-32
)
(models
LPS-35
& LPS-55)
8.88”
16.25”
.50 Extrusion from wall
after installation
TEST AC CHG INV
PUSH ON ON ON
Ceiling T-grid Mount Housing
8”
23.88” 6.19”
8.56
”
4.75”
Surface Mount Housing
Recessed Mount Housing
7.38”
14.75” 4.38”
3.13”
(models
LPS-20
& LPS-32
)
(models
LPS-35
& LPS-55)
8.88”
16.25”
.50 Extrusion from wall
after installation
TEST AC CHG INV
PUSH ON ON ON
Ceiling T-grid Mount Housing
8”
23.88” 6.19”
8.56
”
4.75”
Recessed Ceiling Model
(CLB-) (CLB-)