user manual Ceramic glass induction hob PAI8000E
progress Contents Safety Information Description of the Appliance Operating the appliance Tips on Cooking and Frying Cleaning and Care 2 3 4 9 11 What to do if ... Disposal Installation Instructions Service 12 13 13 15 Subject to change without notice Safety Information Warning! Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
progress 3 • To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry. • The ventilation gap of 5mm between the worktop and front of the unit underneath it must not be covered. • Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface. • Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway.
progress Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
progress 5 Switching the appliance on and off Control panel Display Pilot light Switch on Touch for 2 seconds / lights up Switch off Touch for 1 second / none goes out After switching on, within approx. 10 seconds a heat setting or a function Setting the heat setting must be set, otherwise the appliance automatically switches itself off. Control panel Display Increase Touch to Decrease Touch to Switch off Touch and at the same time The keep warm setting lies between and .
progress Locking/unlocking the control panel The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth. Control panel Switch on Touch Switch off Touch Display (for 5 seconds) previously set heat setting When you switch the appliance off, the locking function is automatically switched off.
progress 7 Power Management The cooking zones of the cooking surface have a maximum power available to them. Two cooking zones make up a pair (see figure). So that the Power function can always be carried out, Power Management may reduce the power of the other cooking zone in the pair Example: heat setting 9 is selected on a cooking zone. The Power function is switched on for the cooking zone paired up with it.
progress The heat setting indicator of the selected cooking zone goes out, as long as the timer time can be set. If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. If the pilot light is flashing more slowly, the heat setting indicator appears again and the heat setting can be re-set or modified. Setting time Step 1.
progress 9 Automatic switch off Cooking surface • If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. • If one or more sensor fields are covered by objects (a pan, cloths, etc.) for longer than approx. 10 seconds, a signal sounds and the cooking surface switches off automatically. • If all cooking zones are switched off, the cooking surface automatically switches itself off after approx.
progress Certain cookware can make noises when being used on induction cooking zones. These noises are not a fault in the appliance and do not affect operation in any way. Bottom of the cookware The bottom of the cookware should be as thick and flat as possible. Pan size Induction cooking zones adapt automatically to the size of the bottom of the cookware up to a certain limit.
progress 11 Heat setting Cooking process Suitable for Cooking time Tips/Hints 6-7 Gentle Frying Frying escalopes, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts Steady frying Turn halfway through cooking 7-8 Heavy Frying Hash browns, loin steaks, steaks, Flädle (pancakes for garnishing soup) 5-15 mins.
progress What to do if ... Problem Possible cause Remedy The appliance cannot be switch- More than 10 seconds have Switch the appliance on again.
progress 13 Problem Possible cause Remedy and number are displayed Electronics fault Disconnect the appliance from the electrical supply for a few minutes (Take the fuse out of the house’s wiring system) If after switching on again, is displayed again, call the customer service department and minus are displayed Light rays that are too strong on the control panel, for example bright sunlight Briefly shade the control panel, for example with the hand Acoustic signal sounds, appliance switches itself
progress Warning! Risk of injury from electrical current. • The electrical mains terminal is live. • Make electrical mains terminal free of voltage. • Follow connection schematic. • Observe electrical safety rules. • Ensure anti-shock protection by installing correctly. • The appliance must be connected to the electrical supply by a qualified electrician. Warning! Risk of injury from electrical current. • Loose and inappropriate plug and socket connections can make the terminal overheat.
progress 15 PAI 8000 E 55GBD80AG 230 V PROGRESS Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
www.progress-hausgeraete.
