User manual

remover, touch the hob. This can cause
matt patches.
Care and cleaning
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Deactivate the appliance and let it cool
down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
Disposal
WARNING! Risk of injury or
suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
PRODUCT DESCRIPTION
Cooking surface layout
145 mm
180 mm
1
3
2
1
Cooking zone
2
Power indicator
3
Control knobs
Control knob
Sym-
bol
Function
0
Off position
- 3
Heat settings
Residual heat
WARNING! There is a risk of
burns from residual heat.
DAILY USE
WARNING! Refer to Safety
chapters.
Before first use
Put cookware containing water on each
cooking zone, set the maximum position
and operate the hob for 10 min. This is to
burn off the residue in the appliance. After
that, operate the hob at minimum position
for 20 min. During this period, an odour and
smoke can occur. This is normal. Make
sure that the airflow is sufficient.
Using the rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up
faster than usual plates. The red dots are
14 Progress