User manual

BEFORE FIRST USE
WARNING! Refer to Safety
chapters.
Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial position.
Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few seconds
the display shows the software version.
After the software version goes off, the
display shows h and 12:00. "12" flashes.
1.
Touch
or to set the hours.
2.
Touch
or .
3. Touch or to set the minutes.
4. Touch
or .
The Temperature / Time display shows the
new time.
Changing the time
You can change the time of day only when
the appliance is off.
Touch .
flashes in the display.
To set the new time of day, refer to "Setting
the time".
Preheating
Preheat the empty appliance before first
use.
1. Set the function Top / Bottom Heat
and the maximum temperature.
2.
Let the appliance operate for 1 hour.
3. Set the function True Fan Cooking
and the maximum temperature.
4.
Let the appliance operate for 15
minutes.
Accessories can become hotter than usual.
The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow in the room is sufficient.
DAILY USE
WARNING! Refer to Safety
chapters.
Operating the appliance
To operate the appliance you can use:
• the manual mode
• automatic programmes
Oven functions
Oven function Application
True Fan Cook-
ing
To bake on up to 3 shelf positions at the same time and to
dry food. Set the temperature 20 - 40 °C lower than for
Top / Bottom Heat.
Pizza Setting To bake food on 1 shelf position for a more intensive
browning and a crispy bottom. Set the temperature 20 -
40 °C lower than for Top / Bottom Heat.
Progress 9