User manual
Fast heat up
Do not put food in the oven
when the Fast heat up
operates.
The Fast heat up is available only for
some oven functions. If Faulty tone is
turned on in the settings menu, the signal
sounds if the Fast heat up is not available
for the set function. Refer to "Additional
functions" chapter, Using the settings
menu.
The Fast heat up decreases the heat up
time.
To turn on the Fast heat up press and
hold for more than 3 seconds.
If the Fast heat up is turned on the display
shows: flashing horizontal bars and
.
CLOCK FUNCTIONS
Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change the
time of day only when the oven is on.
DURATION To set how long the oven works.
END To set when the oven turns off.
TIME DELAY To combine DURATION and END function.
SET+GO To turn on the oven with necessary settings with only one
press of the sensor field any time later.
MINUTE MINDER To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE MIND‐
ER at any time and also when the oven is off.
00:00 COUNT UP TIMER To set the count up, which shows how long the oven
works. This function has no effect on the operation of the
oven. It is on immediately when the oven starts to heat.
The COUNT UP TIMER is not turned on if DURATION and
END are set.
Setting and changing the time
After the first connection to the mains, wait
until the display shows and 12:00. "12"
flashes.
1. Touch or to set the hours.
2. Touch or .
3. Touch or to set the minutes.
4. Touch or .
The display shows the new time.
To change the time of day touch again
and again until starts to flash.
Setting the DURATION
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Use or to set the minutes for
DURATION time.
Progress 11