User manual

Programme number Programme name
18 CONVENIENCE CAKE
19 CONVENIENCE PIZZA
20 CONVENIENCE POTATO TYPES
CARE AND CLEANING
Warning! Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a cleaning
agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories after each use and
let them dry. Use a soft cloth with warm
water and a cleaning agent.
• If you have nonstick accessories, do not
clean them using aggressive agents,
sharp-edged objects or a dishwasher. It
can cause damage to the nonstick coat-
ing.
Pyrolytic cleaning
1.
Remove all accessories and removable
shelf supports.
Do not start the pyrolytic cleaning
if:
– You did not remove the shelf support
or telescopic runners (if supplied). In
some models, the display shows
"C1" when this error occurs.
– You did not remove the core temper-
ature sensor plug from the socket. In
some models, the display shows
"C2" when this error occurs.
– You did not fully close the oven door.
In some models, the display shows
"C3" when this error occurs.
2.
Remove the worst dirt manually.
3.
Set the Pyro Cleaning function (refer to
“Oven functions”).
4.
Touch
or to set the duration of
the cleaning procedure:
– 1 – 1:00 for a low degree of dirt
– 2 – 1:30 for a usual degree of dirt
– 3 – 2:30 for a high degree of dirt.
Touch
to activate the pyrolytic
cleaning.
Useful information:
You can use the End function to delay the
start of the cleaning procedure.
During the pyrolytic cleaning the door is
locked. The symbol
and the bars of the
heat indicator come up, until the door un-
locks.
The door unlocks when the temperature in-
side the oven is under safety conditions and
the pyrolytic cleaning finishes.
During the pyrolytic cleaning the lamp is de-
activated.
Cleaning reminder
To remind you that the pyrolytic cleaning is
necessary the cleaning reminder symbol
flashes in the display after each deactivation
of the appliance for the next 10 seconds.
The cleaning reminder goes out:
• After the end of the pyrolytic cleaning
• When you deactivate it in the basic
settings (refer to "Settings menu")
26 progress