User manual

49 progress
Setting the clock:
1. Press the button
and, while the
symbol
is flashing, set the correct time
of day by pressing buttons “
” or “ ”
(Fig. 1).
The time arrow symbol will disappear
about 5 seconds after the correct time is
displayed.
2. As soon as the symbol
stops flashing,
press button
twice.
Then, proceed as described in point 1.
Before first use
Before the first use, the oven should be
heated while empty.
To do this, proceed as follows:
1. Press the button to switch on the
oven.
2. Press the button twice and select the
«Hot air» function
(Fig. 2).
3. Set the temperature to 250°C by using
the button “ ”.
4. Allow the oven to run empty for approxi-
mately 45 minutes.
5. Open a window for ventilation.
This procedure should be repeated with
the function «Top and bottom heating
element» and «Thermal grill» for about 5-10
minutes.
Remove all packaging, both in-
side and outside the oven, before
using the oven.
When the oven is first connected to the
electrical supply, the display will automatically
show 12:00 and the symbol
flashes.
Ensure the correct time of day is set be-
fore using the oven.
Before using for the first time
Fig. 1
Fig. 2