User manual

Pyrolytic 2 (P 2), Time: 2 hours. 30 mins. =
30 mins Heating-up +1 hour. 30 mins. at 480
°C + 30 mins Cooling down time.
The pyro duration time cannot be changed.
Before performing the pyrolysis, all side
rails must have been removed.
Oven shelf runner
The shelf support rails on the left and right
hand sides of the oven can be removed for
cleaning the side walls.
First ensure that the oven has cooled down
and has been disconnected from the mains.
Removing the shelf support rails .
First pull the front of the rail away from the
oven wall and then unhitch at the back.
Fitting the shelf support rails
To install, first reattach the rails at the back,
then put them into position at the front and
press them into place.To clean the shelf sup-
port rails, soak in warm soapy water and re-
move stubborn marks with a well wetted
soap impregnated pad. Rinse well and dry
with a soft cloth.
To activate the pyrolytic cleaning
function proceed as follows:
1.
Using the button
switch on the oven.
Press the button
as often as neces-
sary, until the Pyro function symbol
(level 1 - P I) appears in the display
and the symbol and the indicator Py-
ro flashes in the display at the same time
and an acoustic signal is emitted
This means that, before activating the py-
rolytic cleaning function, you have to re-
move all the oven accessories and the
side rails from the oven cavity.
2.
The “Cooking time” symbol
will flash
for 5 seconds; during this time, press the
button ‘
’ or ‘ ’ to select the pyrolytic
1 (P I) or pyrolytic 2 (P 2) function
progress 47