User manual

3. Once you have chosen the desired pyro-
lytic function, Pyro will flash in the display
waiting for confirmation to start the pyro-
lytic cleaning function.
4. To confirm the desired pyrolytic cleaning
function, press the button
. The dis-
play Pyro stops flashing and the symbol
will disappear, the acoustic signal will
stop, the oven lamp will switch off and the
pyrolytic cleaning cycle starts
As soon as the temperature in the oven
increases, the thermometer symbol
in-
creases slowly, indicating that the tem-
perature inside the oven is increasing.
5. After some time the door lock will be ac-
tivated and the respective symbol
will
be displayed
Now the button is no longer active.
After ending the pyrolytic cleaning process,
the display shows the time of day. The oven
door is still locked.
Once the oven has cooled down, an acoustic
signal will be emitted, the symbol
will dis-
appear and the door will unlock.
To stop the pyrolytic cleaning cycle at any
time; press the button
.
NOTE: The time indication includes the cool-
ing down time. If you select a cooking func-
tion while the pyrolytic function is active, the
cleaning cycle will be interrupted.
If the oven door lock is activated, it is impos-
sible to select any cooking function until the
door lock is off.
Wait until the door lock is off to use the oven.
To programme the pyrolytic cleaning
cycle (delayed start, automatic stop)
If you desire, you can programme the starting
and ending time of the pyrolytic cleaning cy-
cle.
1.
Use the button
to switch on the oven.
Press the button
as often as neces-
sary, until the Pyro function symbol
(level 1 - P I) appears in the display.
Simultaneously the “ Pyro indicator and
the symbol
will flash in the display and
an acoustic signal will be emitted.
This means that, before activating the py-
rolytic cleaning function, you have to re-
move all the oven accessories and the
side rails from the oven cavity (see the
previous chapter).
2.
The Cooking Time symbol
will flash
for some seconds; during this time push
the button ‘
’ or ‘ ’ to select the
pyrolytic 1 (P I) or pyrolytic 2 (P 2) func-
tion.
3. Once you have chosen the desired pyro-
lytic function, Pyro will flash in the display
waiting for confirmation to start the pyro-
lytic cleaning function.
At this time, push the time function button
.
“The End of Cooking” symbol
and
the arrow symbol
flash. On the control
panel, the cleaning cycle (that is, the ac-
tual time + cooking time) will displayed.
48 progress